Bambu Lab P1S 3D Printer $899 ($300 off) / P1S Combo with AMS $1,279 ($371 off) @ PB Tech & Marvle3D (NZ Stock at Marvle3D)

110
Bambu Lab P1S 3D Printer $899 ($300 off) / P1S Combo with AMS $1,279 ($371 off) @ PB Tech & Marvle3D (NZ Stock at Marvle3D)
Go to Deal
starker3 on 06/11/2025 - 20:52 marvle3d.co.nz (803 clicks)

Both the Bambu Lab P1S and P1S Combo (with AMS) are currently on sale at all official NZ resellers:
• P1S Printer only: $899 (was $1,199) – $300 off
• P1S Combo (with AMS): $1,279 (was $1,650) – $371 off

Marvle3D – Local stock available, ships immediately
No coupon required and free click and collect

PB Tech – Slight delay as stock is incoming (website lists 15 December but all other retailers show 15 November outside of NZ so might be a mistake)
Requires coupon BAMBU (price shown on web page is without coupon applied)

These prices match across all official resellers. Great opportunity if you’ve been waiting to get into Bambu’s CoreXY printers, especially with the AMS for multi-colour printing.

Electrical & Electronics 3D Printer Bambu Lab

Related Stores

marvle3d.co.nz
marvle3d.co.nz

Comments

Search through all the comments in this post.
  • ABCDEFG on 06/11/2025 - 21:06

    Oooh, this could be me upgrading my A1 Mini.

  • ace310 on 06/11/2025 - 21:36
    +1

    This is nice but have been waiting for A1 combo for a while and doesn't seem to get any lower.

    Probably stock clearance as P2S is released

    • starker3 on 06/11/2025 - 21:54
      +2

      Yeah most likely. I’m not complaining though, the P1S is a solid printer and with the AMS at a decent discount is excellent.

      • ace310 on 06/11/2025 - 21:55

        No doubt about it. I am on a tight budget and will not be used that much.

        • doubledippps on 07/11/2025 - 10:18

          Interested with A1 combo too, please post if you find one!

          • ace310 on 07/11/2025 - 22:02

            @doubledippps: $749 at pbtech currently. Mighty ape also sells it, I am thinking of trying price match if they do it. In that case can use shopback cashback + use credit card.

            Edit: I think no more price matches.

    • samuelkdavis on 28/11/2025 - 21:28

      Thanks for your message about this being stock clearance due to the P2S. I read up on it and decided on going with the P2S. I'm so glad I did, the filament drying of the P2S alone is worth it, and then all the additional small benefits made it a decision I'm really happy with.

      • ace310 on 28/11/2025 - 21:44

        That's nice. I just pulled trigger on A1 combo for $739 + 8% cashback from mighty ape.

  • Kalongsore on 07/11/2025 - 10:30

    What's the A1 combo price when discounted?

    • ace310 on 07/11/2025 - 11:26

      I see currently it's discounted to $749. Which is lowest I have seen. Might pull trigger on it.

      Anyone think if we see any more discounts later on?

      • starker3 on 07/11/2025 - 15:36
        +1

        Don't think we'll see more discounts than the current prices for some time. This is their big early black friday + P2S + H2D launch clearing out the older series stock.

  • felixfurtak on 07/11/2025 - 20:37

    How does the multi color thing work?

    • mdsl32 on 08/11/2025 - 15:49

      Chops the filament off then retracts it then extrudes the remainder when you swap filament into the "Poop chute"

  • kiwijunglist on 07/11/2025 - 20:59

    NZ cost so much more $$ :-(

    I'd like to get a 3d printer but it's so expensive in nz compared to au or asia/usa.

    • ace310 on 07/11/2025 - 21:59

      Absolutely. That's the main reason I am holding off on my hobby as don't know how much I will use it.

      • kiwijunglist on 07/11/2025 - 22:09

        I also don't have a good place to put it in my house, kids will bang into it.

        • Fragluton on 08/11/2025 - 16:34

          Garage then vent it through the wall like I did. Its in garage due to fumes though mainly, though i'm sure the kids would be keen to play with it.

          • kiwijunglist on 08/11/2025 - 20:05

            @Fragluton: My Garage, although dry isn't insulated so i feel it's not good enough.

        • felixfurtak on 10/11/2025 - 09:09

          My kids love my 3D printer. They are always finding things on Thingiverse to print and recently started designing their own Minecraft inspired creations in Blockbench and then printing them.

      • Fragluton on 08/11/2025 - 16:35

        Once you have one… I got one years ago for a bit of fun, now there isn't a room in the house that doesn't have something printed in it.

  • ace310 on 14/11/2025 - 09:21
    +1

    Few of the 3d printers are similar price ($10 Lower with primate) on Mighty Ape.

    P1S Combo : $1269 with primate
    A1 Combo: $739 with primate

    https://www.mightyape.co.nz/mn/bambu-lab/shop/category/compu…

    Also, can include shopback cashbacks (currently 8%) for further discounts.

  • ace310 on 27/11/2025 - 10:51

    Any deals on filaments? Going to order A1 combo soon and was thinking if there are any filaments as a starter I should get?

Login or Join to leave a comment
Login Join