PANiCnz » user profile

Member Since 17/10/2015
Last Seen 1 hour 4 min
Badges 3
Location Auckland

Recent Activities

Beat that flight seems to redirect to third party sites for making the booking rather than directly through the airline. How reputable are…
24/07/2024 - 18:23
Did a print this weekend, seems to print fine. Seems comparable to the eSun I would normally use.
14/07/2024 - 13:06
PANiCnz was awarded a badge.
14/07/2024 - 13:06
Me neither, but it seems to review well on Amazon etc
09/07/2024 - 14:27
ELEGOO PLA Filament 1KG $20 + Shipping @ Marvle3D
1kg rolls of ELEGOO PLA filament are on sale at Marvle3D for $20 plus shipping. Limited colour range but seems quite aggressively priced. I…
09/07/2024 - 12:33
At a Z station or just in general?
30/06/2024 - 08:46
There is tons of feedback on these over at Ozbargin (largely positive). Ive got one and its great. Really cant see what value you get from…
17/05/2024 - 12:44
You can get a 5600G for $208 from ExtremePC, a much better CPU for the price. The 3200g and 3400g probably should be half this price.
01/05/2024 - 09:01
Worked for me in Auckland.
02/03/2024 - 18:37
Too heavy and just gutless, hardly cuts. My neighbour has the DeWalt one and it looks much better. My dad has a cheap noname one of TradeMe…
18/02/2024 - 19:45
Ego and Husqvarna are kinda in a different league price wise compared to this Greenworks gear. My local Husqvarna dealer is a dick so if…
16/02/2024 - 16:10
Thanks! Grabbed a couple of non-urgent items I don't want to drive to PB for and don't want to pay shipping for.
16/02/2024 - 12:35
Any thoughts on the 40v pole hedge trimmer? I bought an 18v Ryobi one and its useless.
16/02/2024 - 12:06
If you haven't already seen it Frigate is a great tool to use as your NVR with HA. Really good integrations with HA and does great object…
09/01/2024 - 11:37
Raspberry Pi's aren't that hard to get anymore, PBTech even seems to have RPi5 4GB in stock. But like @ace310 suggests, I'd recommend a…
05/12/2023 - 17:06
If you're willing and able to season it, I'd just look on TradeMe for a local supplier charging around market rate. Ignition are good but…
11/11/2023 - 18:11
Any free shipping codes at the moment?
01/11/2023 - 18:49
I'd personally just buy a Stihl. Last time i looked it was Stihl and Huskvarna at the top of the Consumer report. They're entry level…
15/10/2023 - 19:05
Gaspy indicates Z in Waiuku has matched the local Gull but it's not showing up on my Z app :( I'm borderline 30km's from Waiuku so might go…
14/10/2023 - 12:56
I think the Lexar can still be bought from Mwave in AU for compatable pricing to what PB was selling.
17/09/2023 - 11:28
AUAFFILIATES5 seems to be active over on OzBargin, so you could try NZAFFILIATES5.
12/09/2023 - 20:09
Those are some good discounts! Taking a family holiday in September and would save at least 50%, but don't think i want to risk having our…
20/08/2023 - 10:58
Was going to suggest a WD15, a few on TM at the moment for $80 - $100. Sometimes also get listed under K17A.
10/07/2023 - 18:08
I think this has expired, Gaspy is showing 2.679 now :(
01/07/2023 - 18:25
Mobil Don Buck road is $2.19 and Mobil Pukekohe is $2.21. Once you apply the Farm Source discount it's a pretty good price.
28/05/2023 - 12:23
Pukekohe, so you probably need to be reasonably south to get it.
17/05/2023 - 20:04
It's an entry level drive from a performance perspective. Would be good as a secondary storage drive or in a USB enclosure. As a primary…
29/12/2022 - 08:27
Loading...