Aaron » user profile

Member Since | 28/02/2016 |
---|---|
Last Seen | Online Now |
Badges | 2 |
Location | Auckland |
Recent Activities

Aaron commented on Looking for Household Dehumidifier Recommendations
I have had a desiccant one for a few years but it has a strong smell (probably the desiccant) when using it. At first I thought it was just…

Aaron replied to
Just Leads cheap on Samsung Watch7 40mm Bluetooth $275, Watch Ultra $655, Galaxy A56 $595, A16 $215, 20000mAh 45W Power Bank $40 + Del. @ NotBadTech

SHOW5SENZ doesn't work for me on the normal store on the watch, only on S25. I don't need a watch but at the price you got it was tempting

Aaron replied to
Just Leads cheap on Samsung Watch7 40mm Bluetooth $275, Watch Ultra $655, Galaxy A56 $595, A16 $215, 20000mAh 45W Power Bank $40 + Del. @ NotBadTech

What codes do you need to get that price?

Aaron replied to
tazomatalax on Kingroon/Sting3D TPU & Multi-colour Silk PLA Filament $29/kg (Buy 4 - $27.55 ea., Buy 10 - $26.10 ea.) + Shipping @ 3dshop.co.nz

That is prototyping PLA which is likely quality control rejects or made from lower quality plastic. I also have some normal PLA available…

Aaron posted a deal Kingroon/Sting3D TPU & Multi-colour Silk PLA Filament $29/kg (Buy 4 - $27.55 ea., Buy 10 - $26.10 ea.) + Shipping @ 3dshop.co.nz
All TPU and Silk PLA Filament are discounted to $29/kg (was $33-$36) Lowest price in NZ for these usually higher priced filament types.…

Aaron commented on New World Dollars Offer - Is it $35 NW Dollars with $300 spend or with 4x $300 Spend?
Does it count if I activate the offer after I already shopped?

20% uncapped Cashback at Chemist Warehouse via shopback Ends at midnight tonight

You forgot to remove the note at the bottom....

Aaron commented on Temu: 70% Cashback ($40 cap, 25 Apr), Chemist Warehouse: 50% Cashback ($10 Cap, 27 Apr 10am-4pm) & More @ ShopBack NZ
I had 3 orders the last time it was 70% and only the first tracked. But @gotyourback sorted it and I got a credit for the other two. I will…

Aaron replied to
gotyourback on 30% CB adidas ($40 Cap, 14/4), 15% CB Hallensteins ($20 Cap, 14/4) & More + $20 Referral Offer @ ShopBack NZ

I had the same happen, will pm you too

Sale ends at Midnight for those who haven't ordered yet

Free gift with purchase- Until the 8th of April, choose a free components part kit if you buy 2 or more rolls* Enter the coupon code on the…

Aaron commented on Tech Inc CR2032 Button Cell Battery $0.97 ($0.44 with CSCBG Premium) + Shipping ($0 C&C/ in-Store) @ Noel Leeming
What's the best before date on them? I got a couple last year and the best before was 12-26 so not that fresh, that's probably why they are…

Aaron commented on TEMU: 70% Cashback for All Customers (Capped at $30, Exclusions Apply) @ ShopBack NZ
So as an existing shopback and temu customer I can make 3 orders of $50 each and get $90 cash back in total?

Aaron commented on Buy 1 Get 1 Free Large ($330) or Extra Large ($490) Kogan Mobile 365 Day SIM Plan (Activate by 31/05/2025) @ Kogan NZ
I ported my number to Vodafone a couple months ago but in my kogan account it still lists the number (it says plan expired). Does anyone…

Aaron commented on PLA Filament Clearance Deal - $17/kg (or $15 with Purchase of 1x Any Non-clearance Filament) + Shipping @ 3dshop.co.nz
I'll be going to the Post office late this afternoon, so if you order before 3.30pm it'll get sent out today.

Aaron posted a deal PLA Filament Clearance Deal - $17/kg (or $15 with Purchase of 1x Any Non-clearance Filament) + Shipping @ 3dshop.co.nz
The factory sent us the wrong line of PLA so we are clearing them out cheap. Prints great, like our other PLA, just the colours and finish…

I think that means the code had already been used when you went to use the points, so you would have been too late anyway if you tried to…

Aaron replied to
HappyNZ on Juggernaut 49" OLED Monitor DQHD 144hz $999, 240hz $1199 + Shipping @ Mighty Ape

Yea I saw that, but the Amazon rating includes lots of different models, most not even OLED so I wouldn't rely too much on that. But its…

Aaron replied to
spren on Juggernaut 49" OLED Monitor DQHD 144hz $999, 240hz $1199 + Shipping @ Mighty Ape

Oh damn where was that price and why did no one post it 😭

Looks like Kogan AU has the same one but branded as Kogan for $1099 AUD so we are getting a better deal. Or maybe they have branded the…

Aaron replied to
danvelopment on Juggernaut 49" OLED Monitor DQHD 144hz $999, 240hz $1199 + Shipping @ Mighty Ape

If you got 2 of these you'd have to stack them, otherwise you'd get a very sore neck haha

Aaron replied to
Wakrak on Juggernaut 49" OLED Monitor DQHD 144hz $999, 240hz $1199 + Shipping @ Mighty Ape

Thanks, I'll keep an eye on that thread

Aaron posted a deal Juggernaut 49" OLED Monitor DQHD 144hz $999, 240hz $1199 + Shipping @ Mighty Ape
I was looking at a 27" OLED and spotted this in the google shopping ads. Seems very cheap for a 49in OLED. The Samsung equivalent is $1699…

Aaron replied to
chopchops on PLA/PETG/ABS Filament from $20.70 (from $19.67 with $99 Spend) + Shipping @ 3dshop.co.nz

it looks like you don't have PM's enabled. can you turn them on or send me a message so I can send you your $20 off code?

Aaron commented on PLA/PETG/ABS Filament from $20.70 (from $19.67 with $99 Spend) + Shipping @ 3dshop.co.nz
Congratulations chopchops, you are the winner🥳. I will PM you soon with the prize. Big thanks to everyone that ordered and entered. I…

Aaron commented on PLA/PETG/ABS Filament from $20.70 (from $19.67 with $99 Spend) + Shipping @ 3dshop.co.nz
Thanks to all that have commented and ordered so far. The discount Code and the giveaway entry finishes at 11.59PM tonight so get in now if…

Aaron replied to
zajnic on PLA/PETG/ABS Filament from $20.70 (from $19.67 with $99 Spend) + Shipping @ 3dshop.co.nz

Why not now 🤷♂️ lol If you order tonight I'll take it to the post office tomorrow

Aaron replied to
Rlir on PLA/PETG/ABS Filament from $20.70 (from $19.67 with $99 Spend) + Shipping @ 3dshop.co.nz

I'm sure you'll love the upgrade. I saw that PBtech will be stocking them next month, hopefully that brings the price of them down a bit.

Aaron replied to
Grapefruit on PLA/PETG/ABS Filament from $20.70 (from $19.67 with $99 Spend) + Shipping @ 3dshop.co.nz

It's pretty standard to have to open the door/take panels off for PLA if you have a chamber. I will have to do some testing with HS-PLA…
Loading...