Duratech 48W Temperature Controlled Soldering Station $24.90 + Delivery ($0 C&C/ in-Store) @ Jaycar

130

Go to Deal

1ys23 on 14/05/2024 - 13:32 jaycar.co.nz (911 clicks)
Last edited 14/05/2024 - 13:39 by 1 other user

I saw it on OzBargain and noticed that it's on special in NZ as well.
https://www.ozbargain.com.au/node/845794

Not sure if it's any good but it's quite cheap and temp controlled.

Related Stores

Jaycar New Zealand

• 

  Mario on 14/05/2024 - 13:50

  +5

  This powerbank sounds to be a good deal too:

  https://www.jaycar.co.nz/powertech-20000mah-power-bank-with-…

  • 

    Encounter Ekambaram on 14/05/2024 - 18:42

    second that. 18w max output from the USB-C ports.

    • 

      Tims on 16/05/2024 - 17:15

      Is this Powerbank OK to take on flights in cabin baggage?
      Cheers

      • 

        Rai on 16/05/2024 - 21:08

        I went on an international flight last August with a 20,000 mAh power bank and had zero issues.
        The limit is 160 Wh for lithium polymer, and a random chart on the internet I found says 20,000 mAh is roughly approximate to 100 Wh. I hope that helps.

• 

  Rismoor on 14/05/2024 - 14:13

  +1

  Might need this. Moved here from North America and foolishly plugged in my 120v soldering iron in to the wall. It got really red, really fast, haha. Needless to say I need another one.

  • 

    Foodie on 14/05/2024 - 14:19

    I have this one, the dial is quite hard to determine how hot it is going to get,
    orange = not hot enough,
    just on red = not hot enough,
    red all the way = too hot

    That was my experience with it anyhows, it's cheap though.

• 

  Haydz117 on 14/05/2024 - 14:40

  Says both out of stock for me

  • 

    1ys23 on 14/05/2024 - 14:42

    I think C&C is still available for a lot of stores

• 

  fredrickthegreat on 14/05/2024 - 15:55

  +1

  https://www.jaycar.co.nz/creality-ender-3-v3-se/p/TL4751
  This is an even better deal at Jaycar for anyone in the market for a 3D printer. This post should probably be updated with deals in the comments as I do not want to make another post.

  • 

    Wakrak on 14/05/2024 - 16:00

    OzB post
    https://www.ozbargain.com.au/node/845805

    A few Cheapies probably have the Ender-3 Pro on the way

  • 

    Gerbil on 15/05/2024 - 15:01

    Damn! Bought 3 weeks ago for 400 from PB. Great price!

• 

  FERRETBYTE on 15/05/2024 - 12:00

  +3

  Used to work for jaycar a couple of years back, this is a pretty good quality iron and they've been stocking it for as long as I can remember and used to get minimal returns on them when I was working for them, judging on the price and age of them I wouldn't be surprised if they're finally discontinuing it.

  Personally recommend buying a couple replacement tips just in case they are actually discontinuing the soldering iron
  https://www.jaycar.co.nz/conical-05mm-soldering-iron-tip/p/T…