[Pre-Order] Playseat Formula Instinct McLaren Racing Edition & Free Bonus Headset $1,185 + Del. (Avail. 23 Sept) @ Savvy Badger

10

Pre-Order the Playseat Formula Instinct McLaren Racing Edition Sim Cockpit for just $1185 (plus, we'll include a FREE Playmax GX6 Gaming Headset)*

Found a better price? Request a price match on the product page.

*Offer valid until 22nd September 2026 11:59pm (NZST) or while stocks last. T&Cs apply.

Related Stores

savvybadger.co.nz
savvybadger.co.nz

Comments

Search through all the comments in this post.
  • This is the funniest post I've seen in a while. The free headset is worth $19, do you reckon anyone spending $1200 on a sim racing cockpit would even let a $19 gaming headset anywhere near their ears? It's like advertising a Mercedes for $75,000 that comes with the "free gift" of a set of PU Leather Car Seat Covers from Kmart worth $39. Thanks for giving me a good laugh.

    • We're glad we could give you a good laugh! 😄 It seems there may have been a small misunderstanding about the deal though.

      It's actually a bit more like getting the $75,000 Mercedes for $65,000, and then the PU leather seat covers are thrown in for the good laugh… just as you said. 😉 The headset is simply a little bonus, not the reason to buy the cockpit.

      Thanks for stopping by and giving us a chuckle too!

  • What else do you need for a minimum F1 sim racing setup?

    • For a minimum F1 sim racing setup, you’ll need the essentials:
      A racing cockpit or sturdy wheel stand, a force feedback steering wheel, and a set of pedals. From there, you can add upgrades like a proper racing seat, shifter/handbrake (depending on the games you play), a monitor or VR headset, and accessories such as a headset, keyboard tray, or monitor mount.

      A good cockpit and wheel setup are the best places to start. You can always build and upgrade your setup over time as as your passion grows and your lap times drop. 😉

      If you need any help putting together the right setup, feel free to contact us here: https://savvybadger.co.nz/pages/contact

      We’re happy to help you find the best option for your budget and needs. 🏎️💨

      • Thanks.

    • A wheel, pedals, and a display and PC at least. What do you mean by minimum? Sky is kinda of the limit with sim rig setups. What's your budget?

      • Ideally less than $1000 for all. May be the other white F1 seat is an option.

  • bought mine white f1 version for 800 from pbtech, it usually goes on sale, but this cockpit shakes as hell, cant recommend

    • If your white Playseat F1 cockpit is shaking badly, the cause is usually flex in the frame, mounting points, or floor stability rather than a defect.

      Try these fixes:

      1. Tighten every bolt again (most common issue)
        After assembly, the frame often settles and develops play.

      Check all bolts connecting:
      seat frame → base
      steering wheel mount → main frame
      pedal plate → frame
      shifter mount (if fitted)
      Tighten firmly, but don't overtighten and damage the tubes.
      Check again after a few hours of use.

      1. Reduce steering wheel force feedback
        If you are using a strong direct-drive wheel, many Playseat Formula models will flex.

      Recommended starting points:
      Logitech G923/G29: usually fine
      Thrustmaster T300/T598/T818: may need adjustment
      Fanatec CSL DD / DD Pro: reduce torque
      Stronger direct drive wheels (8–12Nm+): expect some movement unless reinforced

      Try reducing FFB strength by 20–40% and see if the shaking improves.

      1. Reinforce the steering wheel mount
        The steering wheel plate is usually where most movement comes from.

      Solutions:
      Add rubber washers between mounting points
      Use locking nuts/thread locker
      Add a support bracket underneath the wheel plate if possible
      Make sure the wheel base is mounted flat (not pulling the plate upward)

      1. Check the floor
        A surprising amount of "cockpit shaking" is actually the floor.

      Try:
      Move it onto a solid surface (wood/concrete floor)
      Avoid thick carpet
      Add a rubber mat underneath the cockpit
      Make sure all feet are touching the ground evenly

      1. Adjust seat position
        With Formula-style Playseats, the seating position puts more leverage on the frame.

      Try:
      Moving the seat closer to the pedals
      Lowering the seat angle if adjustable
      Avoid leaning heavily into the wheel during force feedback

      1. Add a reinforcement plate/bar (best fix)
        For serious racing:
        Add a cross brace between frame sections
        Add a pedal plate support
        Use a DIY aluminium profile reinforcement
        Some flex is normal because it is a tubular frame design made for home use. It should not "shake like crazy" though. The biggest improvement usually comes from tightening bolts + reducing wheel torque + stabilising the floor.

      Hope that helps :)

      • thanks but the force feedback of my wheel was too much for this frame

Login or Join to leave a comment