Just a quick thread for links to replacement shells on Banggood etc. if you see any available. Any that technically aren't FC600 (or HBX 16889 Pro) but you're sure will fit would be appreciated too.
Replacement Flyhal FC600 shells
Wagner on 28/08/2022 - 17:30
Last edited 28/08/2022 - 17:38
Last edited 28/08/2022 - 17:38
Comments
I have a spare body from one of these floating around if you want: https://www.quadifyrc.com/rccarreviews/sg-1601-sg1602-brushl… (same base car)
It's actually the one from the picture. I'm in Auckland if you want to pick up or if you want to cover the postage you can have it.
Terrific stuff, NS. Email about this just sent.
A note for other readers of this thread: These two bodies (a green and orange two-pack) should fit the FC600.
https://www.aliexpress.com/item/1005002651268593.htmlPrice is fine, but seller is currently at 94.6% for positive feedback.
One improvised add-on to the trucks the kids in our street are really enjoying are these bike lights from Torpedo7:
$12.66 with the HNZ code:
https://www.torpedo7.co.nz/products/T7LIFN0AA/title/usb-350l…
$20.36 with the code:
https://www.torpedo7.co.nz/products/MTLIRN0AA/title/bike-tai…
Secure the top two-thirds of the rubber cover on the Magic Shine light to the back of the light (tape or glue). Getting the lights to remain on these trucks (in a way that doesn't have them smashed within the first two minutes of your night racing) will likely require the wheelie bar and back wing, which are in the box and you put on after purchase.